For Sale, multitude of head styles and sizes…
This is a basic list of what I have:
- 12 lbs wood screw, various head styles, sizes and lengths
- 34 lbs pan head machine screw, lots of 1/4-20
- 85 lbs flat head machine screws, lots of 1/4-20 and 3/8-16
- 24 lbs oval head machine screws, many 1/4-20
- 65 lbs of fillister head machine screws, lots of #10 and 1/4-20
- 12 lbs Binding head machine screws, various diameters
- 17 lbs truss head machine screw, many 1/4-20
- 120 lbs of socket head screws, lots of 1/4-20 and 5/16-18, 3/8-16
- 145 lbs hex head machine screws and bolts, many 1/4, 5/16, 3/8
- 80 lbs of round head machine screws, lots of #10, many 1/4 and 3/8
- 30 lbs hex nuts, various sizes
- 50 lbs knurled nuts, various sizes
- 18 lbs set screws, various diameter and lengths
- Various washer and misc shoulder screws, also rolls pins, cotter pins
More than 700 lbs of stainless steel hardware. Check out the links in the above list to see what some of these items sell for retail. Buy all of it or smaller amounts, sold by the pound.
{ 9 comments… read them below or add one }
How much are you asking for the hardware?
Or by the pound?
Thanks,
Al
Thanks for writing Al,
Retail, this stuff sells for about $9-12 a pound depending on the type and size of the fastener.
I will sell smaller quantities at $4 a pound, or the whole lot for $3 a pound.
I’m interested in stainless sheet metal screws but each time I tried to access the stainless items it would only list the stuff already listed under regular fasteners. Do you have any stainless sheet metal screws?
Sorry, no sheet metal screws.
i’m looking for 300-400 1/4-20 x 1.5″..button head screws and 1/4 nuts and 1/4 x 1″ fender washers…..let me know what you have so i can either come by or ask if it can be mailed (i’m in north fallbrook and murrieta area)…thanks
ray
ray, i sent you an email.
I’m interested in your hex head bolts in 1/4 5/16 and 3/8. with nuts and washers.. do you have a store front? keith
Where do I go to buy some of the SS fasteners? Do you
have a store or …. ?
Patty,
If still available I’m looking for SS pan head machine screws 1/4″ 20 x 1-1/2″ either slotted or phillips 1,000+ screws if thats something you have.
Thanks, Chris